Subaru WRX STI

With these shims you can correct both rear camber and rear toe on newer Volkswagens and Audis. By combining the shims (two may be used on each wheel) you can get up to ±1.0° camber change and up to ±.50° toe change. Our wrench (87530) is a must when...

With these shims you can correct both rear camber and rear toe on newer Volkswagens and Audis. By combining the shims (two may be used on each wheel) you can get up to ±1.0° camber change and up to ±.50° toe change. Our wrench (87530) is a must when...

With these shims you can correct both rear camber and rear toe on newer Volkswagens and Audis. By combining the shims (two may be used on each wheel) you can get up to ±1.0° camber change and up to ±.50° toe change. Our wrench (87530) is a must when...

With these shims you can correct both rear camber and toe on newer Volkswagens & Audis. By combining the shims (two may be used per wheel) you can get up to +/-.50 degrees toe Our wrench (87530) is a must when installing these shims. It allows you to...

This hi-strength adjustable lower rear camber arm provides +-2.0deg of change for the popular BRZ, FR-S, WRX, and Impreza. Get the ultimate in performance and handling with this stamped arm featuring our new xAxis Sealed Joint which performs like a...

The Subaru Adjustable Rear Toe EZ Arm provides the maximum toe change required due to camber changes. The toe arm incorporates an integrated OE style balljoint and is easily adjusted for positive or negative toe. California Residents WARNINGInstallation...

The OE rear toe link bushing on many Subarus and the Scion FR-S can be easily removed when using the 67647 Bushing Press Adapter. Our Eccentric Toe Bushings (part# 67660) can then be installed using the adapter and a 72509 Ball Joint Press, or equivalent...

This master balljoint separator set from SPC is a must for any technician replacing balljoints, control arms, or tie rod ends on today's car and SUV's. With 4 different opening sizes ( 24mm, 27mm, 31mm, 36mm ) a threaded height adjustment and 2 different...

Replace the worn bushing on the inboard side of the rear lower control arm on many Subaru models from the 2000's to present. Need the toe cam adjuster too? Check out SPC part number 67668 for many 2000 to 2009 models. Part replaces OE #'s 20254AE01A...

Contains 8 M10 x 1.5 x 40mm allen head rear hub bolts to be used with the rear shims when needed. Use with EZShims. California Residents WARNINGInstallation Instructions

Snow Performance 2015+ Subaru WRX Throttle Body Spacer Injection PlateThis Part Fits:YearMakeModelSubmodel2015-2020SubaruWRX STIBase2015SubaruWRX STILaunch Edition2015-2020SubaruWRX STILimited2016SubaruWRX STISeries.HyperBlue2018SubaruWRX STIType RA

Snow Performance has combined performance, quality, and easy installation in this new water-methanol injection system engineered specifically for all forced induction (supercharged/turbocharged) applications. Increase your pump gas octane by 25 points...

Snow Performance has combined performance, quality, and easy installation in this new water-methanol injection system engineered specifically for all forced induction (supercharged/turbocharged) applications. Increase your pump gas octane by 25 points...

Seibon packs all products carefully to prevent damage during shipping. However, damage may still occur occasionally. Buyer must inspect the packaging and the products carefully upon receiving them, then accept the shipment and notate any damages and...

Seibon packs all products carefully to prevent damage during shipping. However, damage may still occur occasionally. Buyer must inspect the packaging and the products carefully upon receiving them, then accept the shipment and notate any damages and...