Tools

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

When used with #499, this tool will pull most CV joints that use a hidden snap ring to hold them in the transaxle. Made to remove the transaxle assembly without damaging the transmission case or inside roller bearing. California Residents...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

This master balljoint separator set from SPC is a must for any technician replacing balljoints, control arms, or tie rod ends on today's car and SUV's. With 4 different opening sizes ( 24mm, 27mm, 31mm, 36mm ) a threaded height adjustment and 2 different...

Stop damaging steering knuckles by removing linkages or struts with pry bars, screwdrivers and hammers. Use the Steering Knuckle Spreader Tool to make quick work of tight and corroded steering knuckles by simply turning the threaded wedge assembly...

The best tool for removing or installing passenger car and light truck wheel weights. Incorporates hooks for removal of wheel weights on many different types of wheels. Not for use on aluminum or decorative wheels. California Residents...

Camber change on the 2007 and up Sprinter van is quick, easy and locked in with this SPC cam kit. Get up to +- 3.0deg camber change by simply removing the upper OE bolt, loosening the lower bolt, installing and adjusting this cam kit to the desired...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.Installation Instructions

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.Installation Instructions

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.Installation Instructions

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.Installation Instructions

This set centers both steer axle wheels and brake drums to minimize wheel vibrations, brake pedal pulsations, and wheel hop. These sleeves are made specifically for the 'TAG' axles with Accu-Ride 19.5" wheels. California Residents WARNING

Stop wheel hop and vibrations on hub piloted wheels! Hub pilot hole diameter tolerances can allow wheels to be installed and and tightened in an "off center" or clocked position. Designed for UD and Volvo trucks with Hungarian made Alcoa wheels (26.0mm...

Stop wheel hop and vibrations on hub piloted wheels! Hub pilot hole diameter tolerances can allow wheels to be installed and tightened in an "off-center" or clocked position. The 32115 is for Ford F450/550 Super Duty. These tools slide directly over...

Stop wheel hop and vibrations on hub piloted wheels! Hub pilot hole diameter tolerances can allow wheels to be installed and tightened in an "off center" or clocked position. The 32111 threadless wheel centering tool set (3) fits 22mm studs on Heavy Duty...