Steering Knuckles & Spindles

RockJock's Currectlync Drag Link End for their JL Wrangler, JL Unlimited and JT Gladiator steering system features a tapered pin that fits into the vehicle's pitman arm and 1 1/8 in.-18 RH threads that thread into our JK-9704DL-3 Drag Link Adjuster...

RockJock's High-Mount Steering Stabilizer Shock Relocation Bracket Kit allows you to move your existing steering stabilizer shock above your tie rod, getting it completely out of the way of potential rock damage! This kit is an easy, bolt-on solution to...

RockJock provides this retapered pitman arm for use when doing a JK axle swap into a TJ/LJ/XJ/MJ/ZJ. Doing this swap requires a lot of detail parts to make it all come together! Among other necessary component needs, is a way to attach the the steering!...

RockJock's Currectlync rod end cartridges will fit any of the Currectlync universal rod end forgings. These cartridges feature JL/JT factory knuckle taper on the pin and will thread into RockJock's modular extreme duty forged rod end bodies from the top...

RockJock's Flipped Currectlync Drag Link for JK Wrangler and JK Wrangler Unlimited vehicles requires the drag link's tapered hole on the passenger's side knuckle to be tapered from the top instead of from underneath. This simple solution has you drill...

RockJock's Currectlync drag link end for the Jeep JK Wrangler installs at the pitman arm end of the drag link and includes the boot, nut, cotter pin and zerk fitting. This unit will only work as a replacement part for the RockJock Currectlync system - it...

RockJocks 3/8 in. thick laser cut and heat treated steel wrench is specifically designed for use with the Currectlync(R) steering removable rod end cartirdges. Use with a 1/2 in. breaker bar, hit it with a hammer, use a Crescent wrench or even a rock if...

This replacement tie rod end boot is compatible with all of RockJock's Currectlync cartridge style rod ends and universal rod end forgings. This style of boot is used in applications where the rod end will not be articulating at extreme angles and it is...

Universal shock stud used when you are reinstalling the stock steering stabilizer shock onto a new front differential.This Part Fits:YearMakeModelSubmodel2011JeepWrangler70th Anniversary2016JeepWrangler75th...

RockJocks ram assist steering tie rod bracket allows you to easily mount your ram assist ram to the JK-9703 steering system, or any other 1 5/8 in. diameter tie rod tube. Bracket is constructed of laser cut heavy duty steel and features laser cut steel...

This Urethane Replacement Rod End Boot is a universal piece that is able to be used in many tie rod and drag link applications. This flexible boot will move and travel as your suspension articulates off-road, all the while retaining the grease in your...

RockJock's Replacement Rod End Boot is used as a replacement for all of the tie rod and drag link boots on their JL, JT and JK Currectync Steering Systems, as a replacement boot for the drag link boots only on the JK Modular Extreme Duty Steering and...

RockJock's Currectlync rod end cartridges will fit any of the Currectlync universal rod end forgings. These cartridges feature a 1 ton taper on the pin, that fits the tapers found in the knuckles of most 1 ton axles) and will thread into RockJock's...

RockJocks Currectlync(R) rod end cartridges will fit any of the Currectlync(R) universal rod end forgings. These ends will thread into the forgings from the top or the bottom allowing you to create the perfect steering combination for your vehicle...

Right hand thread tie rod end for RockJocks Currectlync(R) heavy duty steering system is designed with 22mm x 1.5 pitch RH threads for maximum strength. Features a zerk fitting for greasing for increased performance and long life. Includes boot, castle...