Camber Kits

The 87365 Adjustable Camber Bolt allows additional camber changes up to +-1.5deg for a total of +-2.5deg, on the popular Ford Crown Victoria, Mercury Marquis, and the Lincoln Town Car. Sagging of the suspension on these heavywieght vehicles is normal and...

This kit provides camber change up to +-2-1/2deg on each rear wheel of Ford Taurus and Mercury Sable station wagons only. After replacing the inner lower control arm bolt and elongating the hole, install the 87350 cam bolt and rotate the head to adjust...

This set of 4 cams allows for quick installation without having to remove the upper control arm bolt. Change camber and caster up to +-1.75deg. California Residents WARNINGInstallation InstructionsThis Part...

Quickly and easily adjust rear camber with this cam and bracket kit designed for the Ford Expedition. Simply replace the OE lock plate and dial camber in exactly where you need it. This kit features a 700 hr salt spray tested coating for corrosion...

The 86375 kit is a stock OE replacement cam/bolt kit for newer GM 1/2, 3/4, and 1 ton truck and van applications. These kits are for amber and caster adjustment. Fast, simple installation. For additional change see our bushings 86330 & 86350 or our new...

Designed to be easily adjusted with a 3/8" drive breaker bar , this cam makes the previously difficult to align 2003 and up GMC Savana and Chevy Express Vans a snap. Simply replace the OE cam on the forward bushing with this cam and you will be able to...

GM's late-model mid-sized 4WD's have very little clearance to adjust the camber and caster with the OE adjusting cams. These specially designed adjusters replace the OE adjusters, and feature a 3/8" square drive hole, allowing fast and easy "on the...

Replace bent, damaged, or lost factory guide pins with these heavy duty knurled pins from SPC and your slotted cam will work like it should again. Every tech needs to have these easy to use pins on the shelf for when a GM 1500, 2500, or Colorado rolls on...

Replace bent, damaged, or lost factory guide pins with these heavy duty knurled pins from SPC and your slotted cam will work like it should again. Every tech needs to have these easy to use pins on the shelf for when a GM 1500, 2500, or Colorado rolls on...

Some users find that once they remove the plastic retainer from the original equipment cam on GM trucks, they can't get adjustment to hold. These lock plates are designed to provide a mechanical lock for the cam bolt to the guide pin. Simply dial in your...

This lock plate is designed to keep the front alignment angles in position by replacing the existing slotted cam. For newer models of GMC's 1500, 2500 and 3500 vehicles. California Residents WARNINGInstallation Instructions

Adjust rear camber on many non-adjustable Ford and Lincoln models with SPC's pantented EZ cam bolt. Simply replace the rear upper control arm to knuckle bolt with SPC's bolt and get +-0.75deg of camber adjustment to bring your vehicle back into...

Adjust Kia Sedona's rear camber with SPC's patented camber bolt. Simply replace the lower rear control arm to knuckle bolt with SPC's bolt and get +-.75deg camber change to get back to specification. US Patent Nos. 8,544,861 * 8,469,375 * D783,393 *...

Quickly restore lost adjustment due to frozen or broken adjusters with this rear camber adjustment cam from SPC. This cam is designed to fit a wide variety of latemodel Hyundai and Kia vehicles and is sold per wheel. Order 2 cams to service both sides of...

Quickly restore lost adjustment due to frozen or broken adjusters with this rear toe adjustment cam from SPC. This cam is designed to fit a wide variety of latemodel Hyundai and Kia vehicles and is sold per wheel. Order two kits to replace the toe...