Bushing Kits

Synergy Lower Control Arm Dual Durometer Bushing 14MM Bolt 2.618in Wide

Synergy Sway Bar End Link Replacement Bushing

Synergy 1.875in Universal Bushing Halve

The OE rear toe link bushing on many Subarus and the Scion FR-S can be easily removed when using the 67647 Bushing Press Adapter. Our Eccentric Toe Bushings (part# 67660) can then be installed using the adapter and a 72509 Ball Joint Press, or equivalent...

SPC Performance Replacement Bushing - For spc72123 / spc72130

This sleeve changes camber and caster on many older model trucks and SUVs with Dana 44 or GMC 10 bolts axles. 4169 spanner socket is required for sleeve removal. Rotate sleeve to fine tune camber/caster adjustment. California Residents...

This sleeve changes camber and caster on many older model trucks and SUVs with Dana 44 or GMC 10 bolts axles. 4169 spanner socket is required for sleeve removal. Rotate sleeve to fine tune camber/caster adjustment. California Residents...

This sleeve changes camber and caster on many older model trucks and SUVs with Dana 44 or GMC 10 bolts axles. 4169 spanner socket is required for removal. Rotate sleeve to fine tune camber/caster adjustment. California Residents WARNINGInstallation...

This sleeve changes camber and caster on many older model trucks and SUVs with Dana 44 or GMC 10 bolt axles. 4169 spanner socket is required for sleeve removal. Rotate sleeve to fine tune camber/caster adjustment. California Residents WARNINGInstallation...

Required: 1 per wheel This sleeve changes camber and caster on many older model trucks and SUVs with Dana 44 or GMC 10 bolts axles. 4169 spanner socket is required for sleeve removal. Rotate sleeve to fine tune caster/camber adjustment. California...

Required: 1 per wheel This sleeve changes camber and caster on many older model trucks and SUVs with Dana 44 or GMC 10 bolt axles. 4169 spanner socket is required for removal. Rotate sleeve to fine tune camber/caster adjustment. California Residents...

Replace your worn fronter lower control arm bushings on the 2018 and newer Jeep Wrangler (JL) or Gladiator (JT) with this replacement bushing from SPC. Sold each, use two bushings per control arm, up to four per vehicle. Need caster or front pinion angle...

Replace the worn bushing on the inboard side of the rear lower control arm on many Subaru models from the 2000's to present. Need the toe cam adjuster too? Check out SPC part number 67668 for many 2000 to 2009 models. Part replaces OE #'s 20254AE01A...

Replace worn track bar bushings on your 1996 through 2002 Toyota 4Runner with this replacement bushing from SPC. Sold each, use up to two bushings on your vehicle. Need to adjust your rear track? Consider replacing your track bar instead with SPC# 25395...

Replace worn out bushings on your 1996 through 2002 Toyota 4Runner rear upper trailing link with this replacement bushing from SPC. These bushings are sold each and fit both the inboard and outboard location on this upper arm. Need pinion angle...