Bump Stops

Synergy 1in Stackable Replacement Snap-Lock Bump Stop Spacer Cap

Synergy 1in Stackable Replacement Snap-Lock Bump Stop Spacer

Synergy Jeep JK/JL Bump Stop Spacer Kit (2-4 Inch) - Pair

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Dial in your up-travel stops on your coil over suspensions. These easy to use Jounce Bumper Spacers allow you to control up-travel by simply placing urethane spacers between your factory bump stop and the shock body. The closed wedge design allows you to...

The seals, O-rings,wear bands,and valve pieces you will need to rebuild one (1) JounceShock,Kit includes Shock Valve Extension (#25515) for charging your JounceShock. California Residents WARNINGInstallation Instructions

The Cupped 90 Durometer Rubber Foot & Domed Target allows up to 30 degrees of JounceShock motion as your suspension travels and articulates. The 90 durometer rubber cup with stands high compression while maintaining silenced coupling of the cup and...

The Rubber Cupped Foot screws directly onto the shaft end of the JounceShock.The high durometer Cupped Foot is normally used in conjuction with the Domed Target(which is bolted or welded to the control arm or axle).This Foot targets your JounceShock to...

The Domed Rubber Foot screws directly onto the shaft end of the JounceShock.This high durometer Rubber Foot is used primarily in applications with scrub,or sideways movement, onto a Target Plate.The Domed Rubber Foot is both quite upon impact and durable...

The Domed foot screws directly onto the shaft of the JounceShock.This is the most traditional of bumpshock ends and is most often used in an application with some scrub on a Target Plate. It can also be used in conjunction with the Shaft Extender # 25603...

The Domed foot screws directly into the shaft of the JounceShock.This is the most traditional of bump shock ends and is most often used in an application with some scrub on a Target Plate.It can also be used in conjuction with the Shaft Extender #...

The threaded Cupped Foot with the Domed Target,which can be bolted or welded to your JounceShock for up to 30deg of motion as your suspension travels. California Residents WARNINGInstallation Instructions

This universal mount provides a versatile weld or bolt on option to mount your JounceShock in a fixed position (trim to fit) California Residents WARNINGInstallation Instructions

The Coil Carrier / Bolt Up Mount can be sandwiched in your spring seat or bolted to the bottom of a frame.Plate can be trimmed to square as a bolt up or welded frame mount. California Residents WARNINGInstallation Instructions