Bump Stops

Suspension Bump Stop

Koni Polyurethane Bump Stop

Bump Stop Poly 55X14Id

Synergy 1in Stackable Replacement Snap-Lock Bump Stop Spacer Cap

Synergy 1in Stackable Replacement Snap-Lock Bump Stop Spacer

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Dial in your up-travel stops on your coil over suspensions. These easy to use Jounce Bumper Spacers allow you to control up-travel by simply placing urethane spacers between your factory bump stop and the shock body. The closed wedge design allows you to...

The Rubber Cupped Foot screws directly onto the shaft end of the JounceShock.The high durometer Cupped Foot is normally used in conjuction with the Domed Target(which is bolted or welded to the control arm or axle).This Foot targets your JounceShock to...

The Domed Rubber Foot screws directly onto the shaft end of the JounceShock.This high durometer Rubber Foot is used primarily in applications with scrub,or sideways movement, onto a Target Plate.The Domed Rubber Foot is both quite upon impact and durable...

The Domed foot screws directly onto the shaft of the JounceShock.This is the most traditional of bumpshock ends and is most often used in an application with some scrub on a Target Plate. It can also be used in conjunction with the Shaft Extender # 25603...

The Domed foot screws directly into the shaft of the JounceShock.This is the most traditional of bump shock ends and is most often used in an application with some scrub on a Target Plate.It can also be used in conjuction with the Shaft Extender #...

The Fixed Mount assembly can be welded to your mounting point.It provides a simple attachment point for your JounceShock.The Fixed Mount will most often be used with the Domed Foot on the shaft end of the shock (part# 25602.) California Residents...

1.5" tall bump stop, polyurethane with 3/8" stud, nut and washer.

1/2" tall bump stop, polyurethane with 3/8" stud, nut and washer.

Prothane Universal Bump Stop - Black