Suspension

RockJock's sway bar end link hardware pack with sealed rod ends for JL/JT Front Antirock sway bars replaces everything except the vertical rods, for a full rebuild of your end links. For use with forged or steel arms, this kit includes, 1 RH 1/2-20...

RockJocks rear trac bar relocating kit for 2007-2018 Jeep JK Wranglers relocates the trac bar mounting point on the differential housing upward to correct trac bar geometry after installation of a lift, as well as strengthening the stock trac bar bracket...

RockJock Uni-Balls for Front Axle Housings are used in 3-link suspension applications, where the passenger's side upper control arm has been eliminated and all of the suspension load is now being applied to the one axle housing mounting location. Our...

RockJock Uni-Balls for Front Axle Housings are used in 3-link suspension applications, where the passenger's side upper control arm has been eliminated and all of the suspension load is now being applied to the one axle housing mounting location. Our...

Replace the front differential housing upper control arm bushings on your 2018 and up Jeep JL Wrangler or JT Gladiator vehicle with Johnny Joint(R) rod ends from RockJock to get maximum articulation out of your suspension! This kit includes a Johnny...

RockJock's Adjustable Sway Bar End Link Set for the front of Jeep JL Wranglers and JT Gladiators features 8 1/2 in. long link rods with 2 5/8 in. of 1/2 in.-20 LH thread and 2 5/8 in. of 1/2 in.-20 RH thread, providing adjustment as-is and extra thread,...

RockJock's Adjustable Sway Bar End Link Set for the front of Jeep JL Wranglers and JT Gladiators features 8 1/2 in. long link rods with 2 5/8 in. of 1/2 in.-20 LH thread and 2 5/8 in. of 1/2 in.-20 RH thread, providing adjustment as-is and extra thread,...

RockJock's Geometry Correction Axle Bracket Kit for the rear Trac Bar of JL Wrangler Unlimited vehicles equipped with the 392 Hemi engine relocates the axle housing mounting point of the rear trac bar upward, correcting the location of the trac bar...

RockJock's Geometry Correction Axle Bracket Kit for the rear Trac Bar of JL Wrangler and Unlimited vehicles relocates the axle housing mounting point of the rear trac bar upward, correcting the location of the trac bar mounting point on lifted vehicles...

RockJock's Currectlync rod end cartridges will fit any of the Currectlync universal rod end forgings. These cartridges feature JL/JT pitman arm taper on the pin and will thread into RockJock's modular extreme duty forged rod end bodies from the top or...

RockJock's Currectlync tie rod tube for their JK Wrangler and Unlimited steering system features 1 1/8 in.-18 RH threads at the passenger's side and and 1 3/8 in.-18 LH threads at the driver's side end. Finished in semi-gloss black. This unit will only...

RockJocks reversed configuration Currectlync(R) drag link end for 2007-2018 Jeep JK Wranglers installs on the top side of the passengers side steering arm and includes the boot, nut, cotter pin & zerk fitting.This Part...

RockJock's Currectlync drag link end for our JK Wrangler steering system is an organically shaped chromoly forging with a deep dip in the middle of the bar that allows for maximum up travel, while still retaining maximum strength and rigidity. At one end...

RockJock's 1 5/8 in. diameter heat treated 4130 chrome moly steel drag link tube only from their JK-9703 JK Modular Extreme Currectlync steering system. Features massive 1 1/4 in. RH/LH threads, machined in wrench flats and a semi-gloss black finish.This...

1 1/4 in. diameter solid alloy steel tie rod bar only for the RockJock Currectlync(R) heavy duty steering system. Designed to use RockJocks 22mm x 1.5 pitch thread tie rod ends. This unit is rated at 200% stronger than than the stock part. For use as a...