Jeep Wrangler

RockJocks heavy duty shock bar pin for use at the end of any shock where bar pins are used in any application. Finished in silver zinc plating.

RockJocks brake hose relocation bracket kit allows the 2007-2018 Jeep JK Wranglers stock brake lines to be retained with a 4 in. lift! Simply remove the lines from the vehicle, bolt them to these brackets with new, supplied hardware and then bolt the...

Right hand thread tie rod end for RockJocks Currectlync(R) heavy duty steering system is designed with 22mm x 1.5 pitch RH threads for maximum strength. Features a zerk fitting for greasing for increased performance and long life. Includes boot, castle...

Left hand thread tie rod end for RockJocks Currectlync(R) heavy duty steering system is designed with 22mm x 1.5 pitch LH threads for maximum strength. Features a zerk fitting for greasing for increased performance and long life. Includes boot, castle...

Oversized, heavy duty steering stabilizer bracket used on the RockJock Currectlync(R) heavy duty tie rod system, but it may also be used in other universal applications that use 1 1/4 in. tie rods. Includes the bracket plate, the two 3/8 in.-24 thread...

Left hand thread drag link end for RockJocks Currectlync(R) heavy duty steering kit for for Jeep TJ, LJ, XJ, MJ and ZJ vehicles is designed with 1 1/8 in. thread for maximum strength. Grease fitting provides for increased performance and long life...

Tie rod end boots wear out, it's inevitable. Drying, cracking, tearing can let grease escape and shorten the life of your tie rod ends. This is the direct replacement boot for all of the RockJock Currectlync steering's tie rod ends. All you have to do is...

RockJocks rear lower shock mount extension brackets for 1997-2006 Jeep TJ Wranglers and LJ Unlimiteds move the bottoms of the shocks outward, to prevent them from making contact with the coil spring cups and the axle tubes on the differential housing ...

For the Jeep enthusiast who wants improved steering control, the heavy duty Rancho RS5000 works on and off the road by absorbing shock loads transmitted from the front wheels to the steering system. The steering stabilizer is engineered for vehicles with...

RockJocks front bar pin eliminator kit for 1997-2006 Jeep TJ Wranglers and LJ Unlimiteds replaces standard sheetmetal bar pins on after-market rear shock installations to properly mount shock absorbers. Bar pin eliminators keep the shock bushings from...

RockJocks rear bar pin eliminator kit for 1997-2006 Jeep TJ Wranglers and LJ Unlimiteds replaces standard sheetmetal bar pins on after-market rear shock installations to properly mount shock absorbers. Bar pin eliminators keep the shock bushings from...

RockJocks extended rear sway bar links for 1997-2006 Jeep TJ Wranglers and LJ Unlimiteds allow you to reuse the stock rear sway bar when your vehicle is lifted 3 1/2 in. to 4 1/2 in.. These links directly replace the stock Jeeps sway bars vertical links...

RockJocks TJ/LJ rear trac bar relocator bracket is unlike any other bracket on the market! Our bracket feature angle built into the top of the bracket to account for lifts to keep your Johnny Joints or bushings on the end of your trac bar in a neutral...

This is the specially machined Johnny Joint(R) rod end out of our CE-9102K front end housing kit. This joints outer shell is machined to 1.795 in. o.d. with a flanged edge and is designed to be driven into the bushing bore on the gear case casting side...

This is the specially machined Johnny Joint(R) rod end out of our CE-9102K front end housing kit. This joints outer shell is machined to 1.795 in. o.d. with a flanged edge and is designed to be driven into the bushing bore on the gear case casting side...