Tools

Using a shop press, the tool is designed for quick, easy removal & installation of the 15605 xAxis sealed flex joint and any other bushing with a 1.25" OD. California Residents WARNING

Using a shop press, the tool is designed for quick, easy removal & installation of xAxis sealed flex joints with 40mm OD and up to 60mm wide; including part numbers 15623, 15625, 15627, 15629, 15631, 15633, 15635, 15637, 15639, and 15643. California...

Using a shop press, the tool is designed for quick, easy removal & installation of the 15617 xAxis joint when building your own Jeep JK track bar. California Residents WARNING

For use on most cars and some light trucks. The tapered wedge easily removes the pitman arm from the shaft with just a few sharp hammer blows. DIMENSIONS: 1" opening, 12" overall length. California Residents WARNINGInstallation Instructions

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.Installation Instructions

The upper control arm ball joint pinch bolt on the popular Audi A/S 4, 5, 6, and 7 models is frequently corroded and must be cut out when removing or replacing the upper arms. This bolt & nut replacement kit has 720 hour saltspray certified coating to...

Often called "dimple dies", flared hole dies are used in sheet-metal fabrications to provide rigidity and strength to flat, unsupported panels. Due to the resulting high strength -to-weight ratio applications promoted by the use of this technique, flared...

For model #s 3850,4000,7000,7500,6900,6950----- Twin cutter / 9831 Grinding set----- Ammco part# 7681-6 FMC John Bean/Barrett # 91212----- RTI Models BRC500,BRC50-----3 cut edges---positive rake 500 series on the car lathe 6 bits per pack. California...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

This high quality hose cutter provides a straight,even cut heater,air conditioning,braided rubber or plastic hose up to 1-1/8" diameter. Replacement blades are part number 10011 and are 2 blades per pack. California Residents WARNINGInstallation...

For Pro-Cut Model 610 On-The-Car Lathe---- Pro-Cut Part # 50-701---- 3 cut edges ---- positive rake for Fords 10 bits per pack. California Residents WARNING

For Pro-Cut Model 610 On-The-Car---- Pro-Cut Part# 50-741 Positive rake carbide---- 3 cut edges----positive rake for Fords 6 bits per pack. California Residents WARNING

For Model #s 1000,1001,3000,4000,4100,7000,7700------- On-vehicle lathe 700,705,710------- Drum side on 3850------12-18 cut edges----round bits for round tool holders 10 bits per pack. California Residents WARNING

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.