Tools

Using a shop press, the tool is designed for quick, easy removal & installation of the 15605 xAxis sealed flex joint and any other bushing with a 1.25" OD. California Residents WARNING

Using a shop press, the tool is designed for quick, easy removal & installation of xAxis sealed flex joints with 40mm OD and up to 60mm wide; including part numbers 15623, 15625, 15627, 15629, 15631, 15633, 15635, 15637, 15639, and 15643. California...

Using a shop press, the tool is designed for quick, easy removal & installation of the 15617 xAxis joint when building your own Jeep JK track bar. California Residents WARNING

For use on most cars and some light trucks. The tapered wedge easily removes the pitman arm from the shaft with just a few sharp hammer blows. DIMENSIONS: 1" opening, 12" overall length. California Residents WARNINGInstallation Instructions

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.Installation Instructions

The upper control arm ball joint pinch bolt on the popular Audi A/S 4, 5, 6, and 7 models is frequently corroded and must be cut out when removing or replacing the upper arms. This bolt & nut replacement kit has 720 hour saltspray certified coating to...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

This high quality hose cutter provides a straight,even cut heater,air conditioning,braided rubber or plastic hose up to 1-1/8" diameter. Replacement blades are part number 10011 and are 2 blades per pack. California Residents WARNINGInstallation...

For Model # 1000,1001,3000,4000,4100,7000,7700------ On-vehicle lathe 700,705,710----Drum side on 3850 Ammco part # 6914-10-----12 CUT EDGES---- NEGATIVE RAKE 10 bits per pack. California Residents WARNING

For Model #S 1000,1001,3000,4000,4100,7000,7700---------- On-vehicle lathe 700,705,710---------DRUMSIDE ON 3850 OEM # 6914-6-----12 CUT EDGES----NEGATIVE RAKE 6 bits per pack. California ResidentsWARNING

FITS MODEL#S 8911,8922,8944,8989,8991,8993------ OEM #433795----POSITIVE RAKE----3 CUT EDGES 5 bits per pack. California Residents WARNING

LEFT HAND TOOL HOLDER 3/8" Square Shank Fits Ammco model 7000 Disc Rotor Lathe and 3000, 4000, 4100 Drum Lathes and Hoffman model 660. Complete with one Carbide Insert No. 062--- California Residents WARNINGInstallation Instructions

RIGHT HAND TOOL HOLDER 3/8" Square Shank Fits Ammco model 7000 Disc Rotor Lathe and 3000, 4000, 4100 Drum Lathes and Hoffman model 660. Complete with one Carbide Insert No. 062--- California Residents WARNINGInstallation Instructions

Small black rubber gasket-type silencer band for solid rotors. DIMENSIONS: 1/4" x 3/8" x 6-1/2" diameter. California Residents WARNINGInstallation Instructions

Large black rubber gasket-type silencer band for solid rotors. DIMENSIONS: 1/4" x 3/8" x 9" diameter California Residents WARNINGInstallation Instructions