Brake Hardware

Slide Pin Bolt Sleeve for many Wilwood Floating calipers. Fits D52 / D154 /DH /HM and HC calipers. Made from high strength steel alloy and plated for corrosion resistance

Caliper wear plates are used to prevent pad “dig-in” and wear on aluminum bodies. Manufactured form stainless steel alloy for maximum abrasion resistance. This specific part number is used for Billet and Forged Superlite Calipers using .80” thick...

Caliper wear plates are used to prevent pad “dig-in” and wear on aluminum bodies. Manufactured form stainless steel alloy for maximum abrasion resistance. This specific part number is used for Billet and Forged Superlite Calipers using .80” thick...

Caliper wear plates are used to prevent pad “dig-in” and wear on aluminum bodies. Manufactured form stainless steel alloy for maximum abrasion resistance. This specific part number is used for Billet and Forged Narrow Dynalite 4 Piston and Dynapro...

Caliper wear plates are used to prevent pad “dig-in” and wear on aluminum bodies. Manufactured form stainless steel alloy for maximum abrasion resistance. This specific part number is used for Billet and Forged Dynalite 4 Piston and Dynalite /...

Rotor T-nuts are used with Dynamic Mount Hats or Rotor Adapters. These sintered steel t-nuts are available in different thickness and bolt hole sizes.

Rotor T-nuts are used with Dynamic Mount Hats or Rotor Adapters. These sintered steel t-nuts are available in different thickness and bolt hole sizes.

Rotor T-nuts are used with Dynamic Mount Hats or Rotor Adapters. These sintered steel t-nuts are available in different thickness and bolt hole sizes.

Caliper Bridge Spacer for Forged Dynalite / Billet Dynalite and NDL Calipers. Available in various thicknesses for .50” thru 1.25” rotor widths. Made from high strength aluminum alloy.

Caliper wear plates are used to prevent pad “dig-in” and wear on aluminum bodies. Manufactured form stainless steel alloy for maximum abrasion resistance. This specific part number is used with D8-4 and D8-6 calipers

Caliper Piston Knock Back Springs. Used in low brake pedal situations due to piston knock back caused by vibration, mount or spindle flex. Part # 300-2434 (1.22” diameter) is used with Wilwood’s conventional stainless steel pistons from 1.62” to 1...

Wilwood’s Tubular Bracket Spacers are used for spacing & offset changes on many applications available multiple diameters and lengths. Engineered from high strength aluminum alloy and finished with black e-coat finish.

Wilwood Fitting Adaptor Brake Line Clip Bowed

Convenient set of four or part # 310-3634, CLIP,RETAINING,PIN for DP6, D8, TX6 and Aero calipers.

Rotor and Hat Register Adapters are used to locate 1 piece iron rotors and aluminum hat assemblies to vehicle specific hub or axle registers. Available in size ranges from 2.00” to 2.88” internal diameter. Requires 3.06” center hole with counter...